forum.wfido.ru  

Вернуться   forum.wfido.ru > Прочие эхи > RU.BINKD

Ответ
 
Опции темы Опции просмотра
  #1  
Старый 17.08.2016, 16:37
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Jul 15 01:10:04 по местному времени:


Updated file: НISTORY in current branch
revision: 1.565; date: 2015-07-03 14:30:22+00; committed by dukelsky; lines: +4 -0
Log message:
Auto update НISTORY
FIX: English usage
============

Updated file: binkd.cfg in current branch
revision: 2.63; date: 2015-07-03 14:30:20+00; committed by dukelsky; lines: +89 -83
Log message:
FIX: English usage
------------

Updated file: binkd.cfg in stable branch
revision: 2.58.2.1; date: 2015-07-03 14:28:33+00; committed by dukelsky; lines: +106 -99
Log message:
FIX: English usage
============

Updated file: binkd.conf in current branch
revision: 1.8; date: 2015-07-03 14:30:20+00; committed by dukelsky; lines: +85 -80
Log message:
FIX: English usage
------------

Updated file: binkd.conf in stable branch
revision: 1.3.2.1; date: 2015-07-03 14:28:33+00; committed by dukelsky; lines: +105 -101
Log message:
FIX: English usage
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #2  
Старый 17.08.2016, 16:37
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Sep 15 01:10:04 по местному времени:


Updated file: НISTORY in current branch
revision: 1.566; date: 2015-09-15 19:47:08+00; committed by dukelsky; lines: +4 -0
Log message:
Auto update НISTORY
Email addresses had incorrect syntax
============

Updated file: doc/howto-en.texi in current branch
revision: 1.4; date: 2015-09-15 19:47:07+00; committed by dukelsky; lines: +2 -2
Log message:
Email addresses had incorrect syntax
============

Updated file: doc/howto-ru.texi in current branch
revision: 1.6; date: 2015-09-15 19:47:07+00; committed by dukelsky; lines: +2 -2
Log message:
Email addresses had incorrect syntax
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.175; date: 2015-09-15 17:23:26+00; committed by dukelsky; lines: +2 -2
Log message:
System directories were erroneously included
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #3  
Старый 17.08.2016, 16:37
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Oct 15 01:10:04 по местному времени:


Updated file: Config.h in current branch
revision: 2.722; date: 2015-10-09 17:54:11+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 2.721; date: 2015-10-09 09:12:41+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: НISTORY in current branch
revision: 1.568; date: 2015-10-09 17:54:12+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 1.567; date: 2015-10-09 09:12:41+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: perlhooks.c in current branch
revision: 2.89; date: 2015-10-09 17:54:08+00; committed by git; lines: +1 -1
Log message:
Typo in perlhooks function call

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 2.88; date: 2015-10-09 09:12:09+00; committed by git; lines: +78 -36
Log message:
Fixed error "attempt to change r/o variable" on perl 5.20

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.177; date: 2015-10-09 17:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 1.176; date: 2015-10-09 09:12:41+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #4  
Старый 17.08.2016, 16:38
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: Config.h in current branch
revision: 2.735; date: 2016-01-24 21:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 2.734; date: 2016-01-24 21:00:48+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 2.733; date: 2016-01-24 20:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.732; date: 2016-01-24 11:37:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 2.731; date: 2016-01-24 11:33:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 2.730; date: 2016-01-24 10:28:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 2.729; date: 2016-01-24 09:54:14+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: НISTORY in current branch
revision: 1.583; date: 2016-01-24 21:32:38+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 1.582; date: 2016-01-24 21:00:48+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 1.581; date: 2016-01-24 20:54:12+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 1.580; date: 2016-01-24 11:37:09+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 1.579; date: 2016-01-24 11:33:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 1.578; date: 2016-01-24 11:27:10+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Fixed gettid syscall detection in configure
------------
revision: 1.577; date: 2016-01-24 10:28:41+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
gettid syscall exists but not working on Max OS X
------------
revision: 1.576; date: 2016-01-24 10:28:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 1.575; date: 2016-01-24 09:54:14+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: binkd.c in current branch
revision: 2.125; date: 2016-01-24 21:32:06+00; committed by git; lines: +8 -0
Log message:
Signal handling in pthread version on FreeBSD
------------
revision: 2.124; date: 2016-01-24 20:54:09+00; committed by git; lines: +0 -6
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.123; date: 2016-01-24 11:33:06+00; committed by git; lines: +6 -0
Log message:
Run servmgr as non-main thread on multithread version
============

Updated file: branch.c in current branch
revision: 2.18; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: breaksig.c in current branch
revision: 2.9; date: 2016-01-24 21:32:06+00; committed by git; lines: +7 -0
Log message:
Signal handling in pthread version on FreeBSD
------------
revision: 2.8; date: 2016-01-24 20:54:10+00; committed by git; lines: +4 -1
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
============

Updated file: common.h in current branch
revision: 2.19; date: 2016-01-24 21:32:06+00; committed by git; lines: +4 -0
Log message:
Signal handling in pthread version on FreeBSD
============

Updated file: exitproc.c in current branch
revision: 2.48; date: 2016-01-24 11:33:06+00; committed by git; lines: +5 -5
Log message:
Run servmgr as non-main thread on multithread version
============

Updated file: md5b.c in current branch
revision: 2.14; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: perlhooks.c in current branch
revision: 2.90; date: 2016-01-24 21:00:14+00; committed by git; lines: +4 -1
Log message:
Fixed segfault after session without perl hooks
============

Updated file: server.c in current branch
revision: 2.65; date: 2016-01-24 20:54:10+00; committed by git; lines: +5 -6
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.64; date: 2016-01-24 11:37:06+00; committed by git; lines: +3 -1
Log message:
Fixed warning on multithread version
============

Updated file: server.h in current branch
revision: 2.8; date: 2016-01-24 20:54:10+00; committed by git; lines: +1 -1
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.7; date: 2016-01-24 11:37:07+00; committed by git; lines: +1 -1
Log message:
Fixed warning on multithread version
============

Updated file: sys.h in current branch
revision: 2.47; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.190; date: 2016-01-24 21:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 1.189; date: 2016-01-24 21:00:48+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 1.188; date: 2016-01-24 20:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 1.187; date: 2016-01-24 11:37:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 1.186; date: 2016-01-24 11:33:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 1.185; date: 2016-01-24 10:28:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 1.184; date: 2016-01-24 09:54:14+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: mkfls/unix/configure in current branch
revision: 2.56; date: 2016-01-24 11:27:08+00; committed by git; lines: +6 -4
Log message:
Fixed gettid syscall detection in configure
------------
revision: 2.55; date: 2016-01-24 10:28:39+00; committed by git; lines: +15 -13
Log message:
gettid syscall exists but not working on Max OS X
------------
revision: 2.54; date: 2016-01-24 10:28:06+00; committed by git; lines: +10 -7
Log message:
pthread version without clock_gettime() - Mac OS X
============

Updated file: mkfls/unix/configure.in in current branch
revision: 2.56; date: 2016-01-24 11:27:08+00; committed by git; lines: +6 -4
Log message:
Fixed gettid syscall detection in configure
------------
revision: 2.55; date: 2016-01-24 10:28:39+00; committed by git; lines: +5 -3
Log message:
gettid syscall exists but not working on Max OS X
------------
revision: 2.54; date: 2016-01-24 10:28:07+00; committed by git; lines: +7 -6
Log message:
pthread version without clock_gettime() - Mac OS X
============

Updated file: unix/sem.c in current branch
revision: 1.3; date: 2016-01-24 10:28:07+00; committed by git; lines: +9 -0
Log message:
pthread version without clock_gettime() - Mac OS X
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #5  
Старый 17.08.2016, 16:38
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Mar 16 01:10:14 по местному времени:


Updated file: Config.h in current branch
revision: 2.741; date: 2016-03-28 15:29:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 2.740; date: 2016-03-28 15:08:43+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: Config.h in stable branch
revision: 2.642.2.51; date: 2016-03-28 15:25:15+00; committed by git; lines: +2 -2
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: НISTORY in current branch
revision: 1.592; date: 2016-03-28 15:29:09+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 1.591; date: 2016-03-28 15:08:43+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: НISTORY in stable branch
revision: 1.482.2.36; date: 2016-03-28 15:25:15+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: perlhooks.c in current branch
revision: 2.92; date: 2016-03-28 15:29:07+00; committed by git; lines: +5 -2
Log message:
Fixed "Modification of a read-only value attempted" error
------------
revision: 2.91; date: 2016-03-28 15:08:11+00; committed by git; lines: +9 -2
Log message:
Fixed "Modification of a read-only value attempted" error
------------

Updated file: perlhooks.c in stable branch
revision: 2.79.2.3; date: 2016-03-28 15:25:12+00; committed by git; lines: +17 -5
Log message:
Fixed "Modification of a read-only value attempted" error

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.196; date: 2016-03-28 15:29:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 1.195; date: 2016-03-28 15:08:44+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: mkfls/unix/binkd.spec in stable branch
revision: 1.101.2.36; date: 2016-03-28 15:25:16+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #6  
Старый 17.08.2016, 16:49
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: .gitignore in current branch
revision: 2.1; date: 2016-01-19 13:22:11+00; committed by git;
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: Config.h in current branch
revision: 2.724; date: 2016-01-19 13:22:22+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 2.723; date: 2016-01-19 13:22:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: НISTORY in current branch
revision: 1.570; date: 2016-01-19 13:22:22+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 1.569; date: 2016-01-19 13:22:16+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: client.c in current branch
revision: 2.100; date: 2016-01-19 13:22:20+00; committed by git; lines: +29 -32
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 2.99; date: 2016-01-19 13:22:12+00; committed by git; lines: +40 -23
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.179; date: 2016-01-19 13:22:22+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 1.178; date: 2016-01-19 13:22:16+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #7  
Старый 17.08.2016, 16:49
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Jan 16 01:10:04 по местному времени:


Updated file: Config.h in current branch
revision: 2.728; date: 2016-01-20 14:52:07+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 2.727; date: 2016-01-20 14:51:28+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 2.726; date: 2016-01-20 14:51:24+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 2.725; date: 2016-01-20 14:50:19+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============

Updated file: НISTORY in current branch
revision: 1.574; date: 2016-01-20 14:52:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 1.573; date: 2016-01-20 14:51:28+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 1.572; date: 2016-01-20 14:51:24+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 1.571; date: 2016-01-20 14:50:20+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============

Updated file: client.c in current branch
revision: 2.104; date: 2016-01-20 14:51:34+00; committed by git; lines: +1 -2
Log message:
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 2.103; date: 2016-01-20 14:51:27+00; committed by git; lines: +56 -56
Log message:
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 2.102; date: 2016-01-20 14:50:52+00; committed by git; lines: +14 -7
Log message:
Code of previous commit tested and fixed.
------------
revision: 2.101; date: 2016-01-20 14:50:14+00; committed by git; lines: +1 -1
Log message:
Initialization warning fixed
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.183; date: 2016-01-20 14:52:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 1.182; date: 2016-01-20 14:51:28+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 1.181; date: 2016-01-20 14:51:24+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 1.180; date: 2016-01-20 14:50:20+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #8  
Старый 17.08.2016, 16:49
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: Config.h in current branch
revision: 2.736; date: 2016-01-25 07:34:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============

Updated file: НISTORY in current branch
revision: 1.587; date: 2016-01-25 14:56:09+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
add option -s 'strip symbol tables' to 'make install' in unix Makefile(.in)
------------
revision: 1.586; date: 2016-01-25 07:47:40+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Removed delay on exit multithread client-only by signal
------------
revision: 1.585; date: 2016-01-25 07:47:39+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Removed delay on exit multithread client-only by signal
------------
revision: 1.584; date: 2016-01-25 07:34:15+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============

Updated file: breaksig.c in current branch
revision: 2.10; date: 2016-01-25 07:47:07+00; committed by git; lines: +3 -1
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: client.c in current branch
revision: 2.105; date: 2016-01-25 07:34:12+00; committed by git; lines: +5 -3
Log message:
Fixed exit by signal on multithread clientonly mode
============

Updated file: mkfls/nt95-msvc/Makefile.dep in current branch
revision: 2.30; date: 2016-01-25 07:47:08+00; committed by git; lines: +1 -0
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: mkfls/unix/Makefile.dep in current branch
revision: 2.17; date: 2016-01-25 07:47:08+00; committed by git; lines: +1 -1
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: mkfls/unix/Makefile.in in current branch
revision: 2.25; date: 2016-01-25 14:56:07+00; committed by git; lines: +2 -2
Log message:
add option -s 'strip symbol tables' to 'make install' in unix Makefile(.in)
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.191; date: 2016-01-25 07:34:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #9  
Старый 28.11.2016, 02:20
binkd inspector
Guest
 
Сообщений: n/a
По умолчанию Changes in binkd sources

binkd inspector написал(а) к All в Nov 16 01:10:14 по местному времени:


Updated file: Config.h in current branch
revision: 2.742; date: 2016-11-27 06:38:18+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============

Updated file: НISTORY in current branch
revision: 1.593; date: 2016-11-27 06:38:18+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============

Updated file: tools.c in current branch
revision: 2.83; date: 2016-11-27 06:38:16+00; committed by git; lines: +16 -6
Log message:
Fixed compilation warnings
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.197; date: 2016-11-27 06:38:18+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============
--- hpt/lnx 1.4.0
Ответить с цитированием
  #10  
Старый 28.11.2016, 11:01
Alexey Vissarionov
Guest
 
Сообщений: n/a
По умолчанию binkd-1.1a.95-1.x86_64.rpm

Alexey Vissarionov написал(а) к All в Nov 16 09:50:00 по местному времени:

Доброго времени суток, All!
28 Nov 2016 01:10:14, binkd inspector -> All:

bi> Log message: Auto increase patchlevel, set 1.1a-95 Fixed compilation
bi> warnings

http://download.binkd.org/linux/bink...5-1.x86_64.rpm

Собран статически, должен работать в любой RPM-based GNU/Linux системе (проверялось на CentOS 6.8, Alt p7 и Owl current).

Работа в других системах возможна, но не гарантируется :-)


--
Alexey V. Vissarionov aka Gremlin from Kremlin
gremlin ПРИ gremlin ТЧК ru; +vii-cmiii-ccxxix-lxxix-xlii

... Разверни часы с кукушкой циферблатом к стене - и получи часы с дятлом!
--- /bin/vi
Ответить с цитированием
Ответ

Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход


Текущее время: 13:10. Часовой пояс GMT +4.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc. Перевод: zCarot