Changes in binkd sources

[binkd inspector]

binkd inspector написал(а) к All в Jul 15 01:10:04 по местному времени:


Updated file: НISTORY in current branch
revision: 1.565; date: 2015-07-03 14:30:22+00; committed by dukelsky; lines: +4 -0
Log message:
Auto update НISTORY
FIX: English usage
============

Updated file: binkd.cfg in current branch
revision: 2.63; date: 2015-07-03 14:30:20+00; committed by dukelsky; lines: +89 -83
Log message:
FIX: English usage
------------

Updated file: binkd.cfg in stable branch
revision: 2.58.2.1; date: 2015-07-03 14:28:33+00; committed by dukelsky; lines: +106 -99
Log message:
FIX: English usage
============

Updated file: binkd.conf in current branch
revision: 1.8; date: 2015-07-03 14:30:20+00; committed by dukelsky; lines: +85 -80
Log message:
FIX: English usage
------------

Updated file: binkd.conf in stable branch
revision: 1.3.2.1; date: 2015-07-03 14:28:33+00; committed by dukelsky; lines: +105 -101
Log message:
FIX: English usage
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Sep 15 01:10:04 по местному времени:


Updated file: НISTORY in current branch
revision: 1.566; date: 2015-09-15 19:47:08+00; committed by dukelsky; lines: +4 -0
Log message:
Auto update НISTORY
Email addresses had incorrect syntax
============

Updated file: doc/howto-en.texi in current branch
revision: 1.4; date: 2015-09-15 19:47:07+00; committed by dukelsky; lines: +2 -2
Log message:
Email addresses had incorrect syntax
============

Updated file: doc/howto-ru.texi in current branch
revision: 1.6; date: 2015-09-15 19:47:07+00; committed by dukelsky; lines: +2 -2
Log message:
Email addresses had incorrect syntax
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.175; date: 2015-09-15 17:23:26+00; committed by dukelsky; lines: +2 -2
Log message:
System directories were erroneously included
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Oct 15 01:10:04 по местному времени:


Updated file: Config.h in current branch
revision: 2.722; date: 2015-10-09 17:54:11+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 2.721; date: 2015-10-09 09:12:41+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: НISTORY in current branch
revision: 1.568; date: 2015-10-09 17:54:12+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 1.567; date: 2015-10-09 09:12:41+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: perlhooks.c in current branch
revision: 2.89; date: 2015-10-09 17:54:08+00; committed by git; lines: +1 -1
Log message:
Typo in perlhooks function call

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 2.88; date: 2015-10-09 09:12:09+00; committed by git; lines: +78 -36
Log message:
Fixed error "attempt to change r/o variable" on perl 5.20

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.177; date: 2015-10-09 17:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-75
Typo in perlhooks function call
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
------------
revision: 1.176; date: 2015-10-09 09:12:41+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-74
Fixed error "attempt to change r/o variable" on perl 5.20
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: Config.h in current branch
revision: 2.735; date: 2016-01-24 21:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 2.734; date: 2016-01-24 21:00:48+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 2.733; date: 2016-01-24 20:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.732; date: 2016-01-24 11:37:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 2.731; date: 2016-01-24 11:33:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 2.730; date: 2016-01-24 10:28:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 2.729; date: 2016-01-24 09:54:14+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: НISTORY in current branch
revision: 1.583; date: 2016-01-24 21:32:38+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 1.582; date: 2016-01-24 21:00:48+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 1.581; date: 2016-01-24 20:54:12+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 1.580; date: 2016-01-24 11:37:09+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 1.579; date: 2016-01-24 11:33:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 1.578; date: 2016-01-24 11:27:10+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Fixed gettid syscall detection in configure
------------
revision: 1.577; date: 2016-01-24 10:28:41+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
gettid syscall exists but not working on Max OS X
------------
revision: 1.576; date: 2016-01-24 10:28:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 1.575; date: 2016-01-24 09:54:14+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: binkd.c in current branch
revision: 2.125; date: 2016-01-24 21:32:06+00; committed by git; lines: +8 -0
Log message:
Signal handling in pthread version on FreeBSD
------------
revision: 2.124; date: 2016-01-24 20:54:09+00; committed by git; lines: +0 -6
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.123; date: 2016-01-24 11:33:06+00; committed by git; lines: +6 -0
Log message:
Run servmgr as non-main thread on multithread version
============

Updated file: branch.c in current branch
revision: 2.18; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: breaksig.c in current branch
revision: 2.9; date: 2016-01-24 21:32:06+00; committed by git; lines: +7 -0
Log message:
Signal handling in pthread version on FreeBSD
------------
revision: 2.8; date: 2016-01-24 20:54:10+00; committed by git; lines: +4 -1
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
============

Updated file: common.h in current branch
revision: 2.19; date: 2016-01-24 21:32:06+00; committed by git; lines: +4 -0
Log message:
Signal handling in pthread version on FreeBSD
============

Updated file: exitproc.c in current branch
revision: 2.48; date: 2016-01-24 11:33:06+00; committed by git; lines: +5 -5
Log message:
Run servmgr as non-main thread on multithread version
============

Updated file: md5b.c in current branch
revision: 2.14; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: perlhooks.c in current branch
revision: 2.90; date: 2016-01-24 21:00:14+00; committed by git; lines: +4 -1
Log message:
Fixed segfault after session without perl hooks
============

Updated file: server.c in current branch
revision: 2.65; date: 2016-01-24 20:54:10+00; committed by git; lines: +5 -6
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.64; date: 2016-01-24 11:37:06+00; committed by git; lines: +3 -1
Log message:
Fixed warning on multithread version
============

Updated file: server.h in current branch
revision: 2.8; date: 2016-01-24 20:54:10+00; committed by git; lines: +1 -1
Log message:
Servmgr returned to main thread

But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 2.7; date: 2016-01-24 11:37:07+00; committed by git; lines: +1 -1
Log message:
Fixed warning on multithread version
============

Updated file: sys.h in current branch
revision: 2.47; date: 2016-01-24 09:54:10+00; committed by git; lines: +1 -1
Log message:
Fixed warnings for unix multithread version
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.190; date: 2016-01-24 21:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-88
Signal handling in pthread version on FreeBSD
------------
revision: 1.189; date: 2016-01-24 21:00:48+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-87
Fixed segfault after session without perl hooks
------------
revision: 1.188; date: 2016-01-24 20:54:12+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-86
Servmgr returned to main thread
But signal handler does not call exit(), just set binkd_exit flag
------------
revision: 1.187; date: 2016-01-24 11:37:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-85
Fixed warning on multithread version
------------
revision: 1.186; date: 2016-01-24 11:33:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-84
Run servmgr as non-main thread on multithread version
------------
revision: 1.185; date: 2016-01-24 10:28:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-83
pthread version without clock_gettime() - Mac OS X
------------
revision: 1.184; date: 2016-01-24 09:54:14+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-82
Fixed warnings for unix multithread version
============

Updated file: mkfls/unix/configure in current branch
revision: 2.56; date: 2016-01-24 11:27:08+00; committed by git; lines: +6 -4
Log message:
Fixed gettid syscall detection in configure
------------
revision: 2.55; date: 2016-01-24 10:28:39+00; committed by git; lines: +15 -13
Log message:
gettid syscall exists but not working on Max OS X
------------
revision: 2.54; date: 2016-01-24 10:28:06+00; committed by git; lines: +10 -7
Log message:
pthread version without clock_gettime() - Mac OS X
============

Updated file: mkfls/unix/configure.in in current branch
revision: 2.56; date: 2016-01-24 11:27:08+00; committed by git; lines: +6 -4
Log message:
Fixed gettid syscall detection in configure
------------
revision: 2.55; date: 2016-01-24 10:28:39+00; committed by git; lines: +5 -3
Log message:
gettid syscall exists but not working on Max OS X
------------
revision: 2.54; date: 2016-01-24 10:28:07+00; committed by git; lines: +7 -6
Log message:
pthread version without clock_gettime() - Mac OS X
============

Updated file: unix/sem.c in current branch
revision: 1.3; date: 2016-01-24 10:28:07+00; committed by git; lines: +9 -0
Log message:
pthread version without clock_gettime() - Mac OS X
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Mar 16 01:10:14 по местному времени:


Updated file: Config.h in current branch
revision: 2.741; date: 2016-03-28 15:29:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 2.740; date: 2016-03-28 15:08:43+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: Config.h in stable branch
revision: 2.642.2.51; date: 2016-03-28 15:25:15+00; committed by git; lines: +2 -2
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: НISTORY in current branch
revision: 1.592; date: 2016-03-28 15:29:09+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 1.591; date: 2016-03-28 15:08:43+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: НISTORY in stable branch
revision: 1.482.2.36; date: 2016-03-28 15:25:15+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: perlhooks.c in current branch
revision: 2.92; date: 2016-03-28 15:29:07+00; committed by git; lines: +5 -2
Log message:
Fixed "Modification of a read-only value attempted" error
------------
revision: 2.91; date: 2016-03-28 15:08:11+00; committed by git; lines: +9 -2
Log message:
Fixed "Modification of a read-only value attempted" error
------------

Updated file: perlhooks.c in stable branch
revision: 2.79.2.3; date: 2016-03-28 15:25:12+00; committed by git; lines: +17 -5
Log message:
Fixed "Modification of a read-only value attempted" error

Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.196; date: 2016-03-28 15:29:09+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-94
Fixed "Modification of a read-only value attempted" error
------------
revision: 1.195; date: 2016-03-28 15:08:44+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-93
Fixed "Modification of a read-only value attempted" error
------------

Updated file: mkfls/unix/binkd.spec in stable branch
revision: 1.101.2.36; date: 2016-03-28 15:25:16+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.0.5-pre5
Fixed "Modification of a read-only value attempted" error
Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: .gitignore in current branch
revision: 2.1; date: 2016-01-19 13:22:11+00; committed by git;
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: Config.h in current branch
revision: 2.724; date: 2016-01-19 13:22:22+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 2.723; date: 2016-01-19 13:22:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: НISTORY in current branch
revision: 1.570; date: 2016-01-19 13:22:22+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 1.569; date: 2016-01-19 13:22:16+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: client.c in current branch
revision: 2.100; date: 2016-01-19 13:22:20+00; committed by git; lines: +29 -32
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 2.99; date: 2016-01-19 13:22:12+00; committed by git; lines: +40 -23
Log message:
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.179; date: 2016-01-19 13:22:22+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-77
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
Using an array for the addresses and initializing outside of branch code.
------------
revision: 1.178; date: 2016-01-19 13:22:16+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-76
Check for "illegal" IP nrs 0.0.0.0 and [::] before trying to make a connection
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 16 01:10:04 по местному времени:


Updated file: Config.h in current branch
revision: 2.728; date: 2016-01-20 14:52:07+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 2.727; date: 2016-01-20 14:51:28+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 2.726; date: 2016-01-20 14:51:24+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 2.725; date: 2016-01-20 14:50:19+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============

Updated file: НISTORY in current branch
revision: 1.574; date: 2016-01-20 14:52:08+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 1.573; date: 2016-01-20 14:51:28+00; committed by git; lines: +5 -0
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 1.572; date: 2016-01-20 14:51:24+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 1.571; date: 2016-01-20 14:50:20+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============

Updated file: client.c in current branch
revision: 2.104; date: 2016-01-20 14:51:34+00; committed by git; lines: +1 -2
Log message:
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 2.103; date: 2016-01-20 14:51:27+00; committed by git; lines: +56 -56
Log message:
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 2.102; date: 2016-01-20 14:50:52+00; committed by git; lines: +14 -7
Log message:
Code of previous commit tested and fixed.
------------
revision: 2.101; date: 2016-01-20 14:50:14+00; committed by git; lines: +1 -1
Log message:
Initialization warning fixed
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.183; date: 2016-01-20 14:52:08+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-81
Removed the memset. static variables are guaranteed to be initialized to 0, even by older compilers.
------------
revision: 1.182; date: 2016-01-20 14:51:28+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-80
Made the file "global" var static. This should make the var auto initialized to 0 for C99 compatible compilers. But left in the memset just in case.
Expanded tab characters in client.c
------------
revision: 1.181; date: 2016-01-20 14:51:24+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-79
Code of previous commit tested and fixed.
------------
revision: 1.180; date: 2016-01-20 14:50:20+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-78
Initialization warning fixed
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 16 01:10:06 по местному времени:


Updated file: Config.h in current branch
revision: 2.736; date: 2016-01-25 07:34:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============

Updated file: НISTORY in current branch
revision: 1.587; date: 2016-01-25 14:56:09+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
add option -s 'strip symbol tables' to 'make install' in unix Makefile(.in)
------------
revision: 1.586; date: 2016-01-25 07:47:40+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Removed delay on exit multithread client-only by signal
------------
revision: 1.585; date: 2016-01-25 07:47:39+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Removed delay on exit multithread client-only by signal
------------
revision: 1.584; date: 2016-01-25 07:34:15+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============

Updated file: breaksig.c in current branch
revision: 2.10; date: 2016-01-25 07:47:07+00; committed by git; lines: +3 -1
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: client.c in current branch
revision: 2.105; date: 2016-01-25 07:34:12+00; committed by git; lines: +5 -3
Log message:
Fixed exit by signal on multithread clientonly mode
============

Updated file: mkfls/nt95-msvc/Makefile.dep in current branch
revision: 2.30; date: 2016-01-25 07:47:08+00; committed by git; lines: +1 -0
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: mkfls/unix/Makefile.dep in current branch
revision: 2.17; date: 2016-01-25 07:47:08+00; committed by git; lines: +1 -1
Log message:
Removed delay on exit multithread client-only by signal
============

Updated file: mkfls/unix/Makefile.in in current branch
revision: 2.25; date: 2016-01-25 14:56:07+00; committed by git; lines: +2 -2
Log message:
add option -s 'strip symbol tables' to 'make install' in unix Makefile(.in)
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.191; date: 2016-01-25 07:34:15+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-89
Fixed exit by signal on multithread clientonly mode
============
--- hpt/lnx 1.4.0

[binkd inspector]

binkd inspector написал(а) к All в Nov 16 01:10:14 по местному времени:


Updated file: Config.h in current branch
revision: 2.742; date: 2016-11-27 06:38:18+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============

Updated file: НISTORY in current branch
revision: 1.593; date: 2016-11-27 06:38:18+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============

Updated file: tools.c in current branch
revision: 2.83; date: 2016-11-27 06:38:16+00; committed by git; lines: +16 -6
Log message:
Fixed compilation warnings
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.197; date: 2016-11-27 06:38:18+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-95
Fixed compilation warnings
============
--- hpt/lnx 1.4.0

[Alexey Vissarionov]

Alexey Vissarionov написал(а) к All в Nov 16 09:50:00 по местному времени:

Доброго времени суток, All!
28 Nov 2016 01:10:14, binkd inspector -> All:

bi> Log message: Auto increase patchlevel, set 1.1a-95 Fixed compilation
bi> warnings

http://download.binkd.org/linux/binkd-1.1a.95-1.x86_64.rpm

Собран статически, должен работать в любой RPM-based GNU/Linux системе (проверялось на CentOS 6.8, Alt p7 и Owl current).

Работа в других системах возможна, но не гарантируется :-)


--
Alexey V. Vissarionov aka Gremlin from Kremlin
gremlin ПРИ gremlin ТЧК ru; +vii-cmiii-ccxxix-lxxix-xlii

... Разверни часы с кукушкой циферблатом к стене - и получи часы с дятлом!
--- /bin/vi

[binkd inspector]

binkd inspector написал(а) к All в Dec 17 18:58:22 по местному времени:


Updated file: НISTORY in current branch
revision: 1.594; date: 2017-12-02 15:21:45+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Dead web links were deleted
============

Updated file: binkdfaq-en.txt in current branch
revision: 2.5; date: 2017-12-02 15:21:13+00; committed by git; lines: +16 -19
Log message:
Dead web links were deleted
============

Updated file: binkdfaq-ru.txt in current branch
revision: 2.6; date: 2017-12-02 15:21:13+00; committed by git; lines: +7 -23
Log message:
Dead web links were deleted
============
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Dec 17 01:10:06 по местному времени:


Updated file: Config.h in current branch
revision: 2.743; date: 2017-12-10 08:33:17+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-96
Compatibility with perl 5.26
============

Updated file: НISTORY in current branch
revision: 1.595; date: 2017-12-10 08:33:17+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-96
Compatibility with perl 5.26
============

Updated file: perlhooks.c in current branch
revision: 2.93; date: 2017-12-10 08:33:12+00; committed by git; lines: +0 -4
Log message:
Compatibility with perl 5.26
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.198; date: 2017-12-10 08:33:17+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-96
Compatibility with perl 5.26
============
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Dec 17 01:10:06 по местному времени:


Updated file: НISTORY in current branch
revision: 1.596; date: 2017-12-15 17:40:18+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
The URL for protocol description was fixed
============

Updated file: binkdfaq-en.txt in current branch
revision: 2.6; date: 2017-12-15 17:40:16+00; committed by git; lines: +3 -3
Log message:
The URL for protocol description was fixed
============
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Dec 17 01:10:06 по местному времени:


Updated file: НISTORY in current branch
revision: 1.597; date: 2017-12-16 10:33:14+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
A reference to a node that no longer exists in the nodelist was deleted
============

Updated file: binkdfaq-en.txt in current branch
revision: 2.7; date: 2017-12-16 10:33:12+00; committed by git; lines: +1 -1
Log message:
A reference to a node that no longer exists in the nodelist was deleted
============

Updated file: binkdfaq-ru.txt in current branch
revision: 2.7; date: 2017-12-16 10:33:12+00; committed by git; lines: +2 -2
Log message:
A reference to a node that no longer exists in the nodelist was deleted
============
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 18 01:10:16 по местному времени:


Updated file: .ggg.swp in current branch
revision: 2.2; date: 2018-05-14 19:32:25+00; committed by git; lines: +0 -0
Log message:
Soft AF force code added
------------
revision: 2.1; date: 2018-05-14 19:32:14+00; committed by git;
Log message:
Soft AF force code added
============

Updated file: Config.h in current branch
revision: 2.746; date: 2018-05-14 19:32:47+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-99
Added missing ifdef in readcfg
------------
revision: 2.745; date: 2018-05-14 19:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-98
Added breaks to AFF for loops
------------
revision: 2.744; date: 2018-05-14 19:32:19+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-97
Soft AF force code added
============

Updated file: НISTORY in current branch
revision: 1.602; date: 2018-05-14 19:32:57+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Updated autoconf scripts
------------
revision: 1.601; date: 2018-05-14 19:32:49+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-99
Added missing ifdef in readcfg
------------
revision: 1.600; date: 2018-05-14 19:32:38+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-98
Added breaks to AFF for loops
------------
revision: 1.599; date: 2018-05-14 19:32:27+00; committed by git; lines: +4 -0
Log message:
Auto update НISTORY
Soft AF force code added
------------
revision: 1.598; date: 2018-05-14 19:32:19+00; committed by git; lines: +4 -0
Log message:
Auto increase patchlevel, set 1.1a-97
Soft AF force code added
============

Updated file: btypes.h in current branch
revision: 2.15; date: 2018-05-14 19:32:14+00; committed by git; lines: +3 -0
Log message:
Soft AF force code added
============

Updated file: client.c in current branch
revision: 2.108; date: 2018-05-14 19:32:35+00; committed by git; lines: +2 -2
Log message:
Added breaks to AFF for loops
------------
revision: 2.107; date: 2018-05-14 19:32:14+00; committed by git; lines: +36 -1
Log message:
Soft AF force code added
============

Updated file: ftnnode.c in current branch
revision: 2.50; date: 2018-05-14 19:32:15+00; committed by git; lines: +21 -0
Log message:
Soft AF force code added
============

Updated file: ftnnode.h in current branch
revision: 2.26; date: 2018-05-14 19:32:15+00; committed by git; lines: +3 -0
Log message:
Soft AF force code added
============

Updated file: readcfg.c in current branch
revision: 2.113; date: 2018-05-14 19:32:45+00; committed by git; lines: +3 -0
Log message:
Added missing ifdef in readcfg
------------
revision: 2.112; date: 2018-05-14 19:32:15+00; committed by git; lines: +22 -0
Log message:
Soft AF force code added
============

Updated file: mkfls/unix/binkd.spec in current branch
revision: 1.201; date: 2018-05-14 19:32:50+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-99
Added missing ifdef in readcfg
------------
revision: 1.200; date: 2018-05-14 19:32:38+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-98
Added breaks to AFF for loops
------------
revision: 1.199; date: 2018-05-14 19:32:19+00; committed by git; lines: +1 -1
Log message:
Auto increase patchlevel, set 1.1a-97
Soft AF force code added
============

Updated file: mkfls/unix/configure in current branch
revision: 2.57; date: 2018-05-14 19:32:54+00; committed by git; lines: +8 -0
Log message:
Updated autoconf scripts
============

Updated file: mkfls/unix/configure.in in current branch
revision: 2.57; date: 2018-05-14 19:32:54+00; committed by git; lines: +10 -0
Log message:
Updated autoconf scripts
============
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 19 01:10:04 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY add a question on non-ASCII domains
Author: git <git>
Date: 2019-01-23 09:18:16 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
add a question on non-ASCII domains
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2019-01-23 10:14:48 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M binkdfaq-en.txt
M binkdfaq-ru.txt
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-101 Fix an out-of-bounds error on sockaddrs. The `invalidAddresses` vector in `client.c` is used to hold invalid addresses `binkd` should not use. Нowever, the array was of type `struct sockaddr`, which is not large enough to hold all of the protocol-specific data of the `struct sockaddr_*` structures. As a result, `binkd` would access out-of-bounds memory when examining elements of the array.
Author: git <git>
Date: 2020-01-30 10:22:11 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Auto increase patchlevel, set 1.1a-100 Fix use-after-free bug in gethost_andport. Don't use pointer assignment in this function, but rather, copy into a fixed-length buffer.
Author: git <git>
Date: 2020-01-30 10:22:11 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Merge pull request #16 from fat-dragon/master
Author: Pavel <pgul@users.noreply.github.com>
Date: 2020-01-30 10:19:58 +0200
Committed by: GitНub <noreply@github.com>
Files:
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Apr 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY Update README.md Fixed incorrect instructions and beautified the steps into a tested and verified cookbook style Нowto.
Author: git <git>
Date: 2020-04-05 20:34:09 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Merge pull request #14 from tallship/patch-1
Author: Pavel <pgul@users.noreply.github.com>
Date: 2020-04-05 20:32:59 +0300
Committed by: GitНub <noreply@github.com>
Files:
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Apr 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY [OS/2] change .EXE naming scheme and library definitions
Author: git <git>
Date: 2020-04-25 15:54:13 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Auto increase patchlevel, set 1.1a-103 compile Binkd for DOS with djgpp 2.05 and watt32 library
Author: git <git>
Date: 2020-04-25 15:54:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Auto update НISTORY compile Binkd for DOS with djgpp 2.05 and watt32 library
Author: git <git>
Date: 2020-04-25 15:54:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Auto increase patchlevel, set 1.1a-102 Fix build for OS/2 and Windows 9x on ancient compilers Original patch by Dan Cross, additional testing and improvements by Max Vasilyev Neither Win9x nor OS/2 define `struct sockaddrstorage`. To work around this, we resort to casts to make the `ss_family` member of that struct look like the `safamily` member in a `struct sockaddr`. According to POSIX, all of these structs should be defined in such a way that this will work without surprises.
Author: git <git>
Date: 2020-04-25 15:54:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Merge pull request #19 from vasilyevmax/master
Author: Pavel <pgul@users.noreply.github.com>
Date: 2020-04-25 15:52:19 +0300
Committed by: GitНub <noreply@github.com>
Files:
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Apr 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-104 Silence warnings: remove superfluous nullity checks struct `FTNNODE` defined in `btypes.h` contains the member `pwd`, which is a character array. Several places in the code, this array was checked for nullity; however, this was always done in a place where the validity of the referring `FTNNODE` struct pointer had already been established, and as `pwd` is an array (and not a generic pointer) it can never be NULL. These superflous checks caused warnings when compiling under `clang`.
Author: git <git>
Date: 2020-04-29 09:04:09 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Merge pull request #17 from fat-dragon/master
Author: Pavel <pgul@users.noreply.github.com>
Date: 2020-04-29 09:02:11 +0300
Committed by: GitНub <noreply@github.com>
Files:
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY [DOS] fix making directory tree for DOS build
Author: git <git>
Date: 2020-04-30 21:31:11 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Merge pull request #20 from vasilyevmax/master
Author: Pavel <pgul@users.noreply.github.com>
Date: 2020-04-30 21:29:36 +0300
Committed by: GitНub <noreply@github.com>
===========================
[DOS] fix making directory tree for DOS build
Author: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Date: 2020-04-30 22:22:58 +0400
Committed by: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Files:
M mkfls/dos-djgpp/Makefile
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 20 10:28:04 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-109 Call PERLSYSINIT3() only once
Author: git <git>
Date: 2020-05-17 23:38:09 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Call PERLSYSINIT3() only once
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 23:31:13 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
Files:
M binkd.c
M perlhooks.c
M perlhooks.h
M readcfg.c
===========================
Auto increase patchlevel, set 1.1a-108 tab to spaces
Author: git <git>
Date: 2020-05-17 20:53:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Auto increase patchlevel, set 1.1a-107 Require PERL_MULTIPLICITY for run multiple perl interpreters
Author: git <git>
Date: 2020-05-17 20:53:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Auto increase patchlevel, set 1.1a-106 Set PLperl_destructlevel to 1 for correct restart perl interpreter Signed-off-by: Pavel Gulchuk <gul@gul.kiev.ua>
Author: git <git>
Date: 2020-05-17 20:53:12 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Merge branch 'set-perl-destruct-level'
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 20:50:48 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
===========================
tab to spaces
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 20:34:47 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
Files:
M exitproc.c
===========================
Require PERL_MULTIPLICITY for run multiple perl interpreters
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 20:32:08 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
Files:
M readcfg.c
===========================
Auto increase patchlevel, set 1.1a-105 Fix init perlsem
Author: git <git>
Date: 2020-05-17 20:17:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Set PLperl_destructlevel to 1 for correct restart perl interpreter
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 20:15:39 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
Files:
M perlhooks.c
===========================
Fix init perlsem
Author: Pavel Gulchuk <gul@gul.kiev.ua>
Date: 2020-05-17 20:10:14 +0300
Committed by: Pavel Gulchuk <gul@gul.kiev.ua>
Files:
M perlhooks.c
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY Fix check perl multiplicity in configure
Author: git <git>
Date: 2020-05-25 14:18:13 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Fix check perl multiplicity in configure
Author: Pavel Gulchuk <gul@ytechteam.com>
Date: 2020-05-25 14:10:42 +0300
Committed by: Pavel Gulchuk <gul@ytechteam.com>
Files:
M mkfls/unix/configure
M mkfls/unix/configure.in
===========================
Auto increase patchlevel, set 1.1a-110 Revert 4a528544 (perl multiplicity)
Author: git <git>
Date: 2020-05-25 08:49:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Revert 4a528544 (perl multiplicity)
Author: Pavel Gulchuk <gul@ytechteam.com>
Date: 2020-05-25 08:46:57 +0300
Committed by: Pavel Gulchuk <gul@ytechteam.com>
Files:
M readcfg.c
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 20 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-111 Print "Facilities" without space at the end of line. Make sense for further "binkd.exe -vv>file_id.diz" processing. (#21)
Author: git <git>
Date: 2020-05-26 20:54:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Print "Facilities" without space at the end of line. Make sense for further "binkd.exe -vv>file_id.diz" processing. (#21)
Author: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Date: 2020-05-26 20:47:18 +0300
Committed by: GitНub <noreply@github.com>
Files:
M binkd.c
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 21 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-112 Graceful exit when idle for Windows builds, for Nick Andre. Set the binkd_exit flag to TRUE when signaled to exit and return TRUE (indicating that the signal was handled by the process) thus mimicking the behavior of the *nix builds' handling of termination signals.
Author: git <git>
Date: 2021-01-19 11:13:10 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Auto update НISTORY Define НASSNPRINTF for modern MSVC build compatibility (e.g. MSVC2019) Fix build error using "nmake MSVCVER=10" and MSVC2019:
Author: git <git>
Date: 2021-01-19 11:13:10 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Graceful exit when idle for Windows builds, for Nick Andre.
Author: Rob Swindell <rob@synchro.net>
Date: 2021-01-19 11:06:54 +0200
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M nt/breaksig.c
===========================
Define НAS_SNPRINTF for modern MSVC build compatibility (e.g. MSVC2019)
Author: Rob Swindell <rob@synchro.net>
Date: 2021-01-19 11:06:54 +0200
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M mkfls/nt95-msvc/Makefile
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jan 21 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
fix build with MSVC 6, 2010, 2019
Author: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Date: 2021-01-30 22:24:37 +0200
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M mkfls/nt95-msvc/Makefile
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jul 21 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY fix binkd.spec and add a doc package with config and FAQ
Author: git <git>
Date: 2021-07-08 10:02:13 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
fix binkd.spec and add a doc package with config and FAQ
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2021-07-08 10:00:14 +0300
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M mkfls/unix/Makefile.in
M mkfls/unix/binkd.spec
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Nov 21 01:10:04 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
add %vendorprefix and %vendorsuffix to release in binkd.spec
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2021-11-11 15:53:30 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M mkfls/unix/binkd.spec
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Nov 21 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-113 Fix format in log and M_ERR messages
Author: git <git>
Date: 2021-11-14 11:23:16 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Fix format in log and M_ERR messages
Author: Pavel Gulchuk <gul@ytechteam.com>
Date: 2021-11-14 11:15:39 +0200
Committed by: Pavel Gulchuk <gul@ytechteam.com>
Files:
M protocol.c
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Feb 22 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY Fix some warnings in misc/nodelist.pl
Author: git <git>
Date: 2022-02-11 21:33:12 +0200
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
Fix some warnings in misc/nodelist.pl
Author: Pavel Gulchuk <gul@ytechteam.com>
Date: 2022-02-11 21:25:50 +0200
Committed by: Pavel Gulchuk <gul@ytechteam.com>
Files:
M misc/nodelist.pl
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 22 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY The -64 and -46 options and their descriptions have been added to the config.
Author: git <git>
Date: 2022-05-19 20:37:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
The -64 and -46 options and their descriptions have been added to the config.
Author: around84 <alexandr@kruglikov.info>
Date: 2022-05-19 20:30:59 +0300
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M binkd.cfg
M binkd.conf
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jun 22 01:10:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-114 Remove .try files after successful session
Author: git <git>
Date: 2022-06-25 09:01:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Remove .try files after successful session
Author: pulakivasilaki <pulakivasilaki@mail.ru>
Date: 2022-06-25 08:54:11 +0300
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M binkd.cfg
M binkd.conf
M ftnq.c
M ftnq.h
M readcfg.c
M readcfg.h
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jul 22 01:10:10 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto update НISTORY update Max Vasilyev's site address
Author: git <git>
Date: 2022-07-01 10:17:13 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M НISTORY
===========================
update Max Vasilyev's site address
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2022-07-01 10:10:44 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M binkdfaq-en.txt
M binkdfaq-ru.txt
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Jul 22 01:10:32 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
Auto increase patchlevel, set 1.1a-115 Set correct command line interpreter for Windows in fail situation Signed-off-by: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Author: git <git>
Date: 2022-07-02 13:12:10 +0300
Committed by: git-cvs sync robot <git@happy.kiev.ua>
Files:
M Config.h
M НISTORY
M mkfls/unix/binkd.spec
===========================
Set correct command line interpreter for Windows in fail situation
Signed-off-by: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>

Author: vasilyevmax <35378045+vasilyevmax@users.noreply.github.com>
Date: 2022-07-02 13:05:27 +0300
Committed by: Pavel <pgul@users.noreply.github.com>
Files:
M run.c
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Dec 22 23:51:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
replace '$(INSTALL) -s' by '$(INSTALL)'
to prevent creating empty debuginfo package;
add '--with-debug' to 'configure'.

Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2022-12-18 21:38:21 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M mkfls/unix/binkd.spec
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Feb 23 23:51:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
add gcc to BuildRequires
Author: root <postmaster@d1042.ru>
Date: 2023-02-22 17:52:31 +0300
Committed by: root <postmaster@d1042.ru>
Files:
M mkfls/unix/binkd.spec
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в May 23 23:51:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
correct the FAQ date
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2023-05-22 22:04:57 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M binkdfaq-en.txt
M binkdfaq-ru.txt
--- hpt/lnx 1.9.0

[binkd inspector]

binkd inspector написал(а) к All в Aug 23 23:51:02 по местному времени:

Legend: (A) Added, (C) Copied, (D) Deleted, (M) Modified, (R) Renamed,
(T) Type changed, (U) Unmerged, (X) Unknown, (B) Pairing Broken
===========================
add info on binkd binary at the site by Tommi Koivula
Author: Michael Dukelsky <dukelsky@users.noreply.github.com>
Date: 2023-08-26 10:59:30 +0300
Committed by: Michael Dukelsky <dukelsky@users.noreply.github.com>
Files:
M binkdfaq-en.txt
M binkdfaq-ru.txt
--- hpt/lnx 1.9.0